User Manual Part 2

DTC COMMUNICATIONS, INC.

OPERATION

Concealed Camera Ports

There are three concealed camera ports on the Utility Box. Each port

is disguised with an ELECTRICAL PANEL IN USE label. Keep the label

surface clean and free from scuff marks. Make sure nothing blocks this

area.

A combination of two labels and an interior screen are installed per

window. Three additional labels (one per window) are also included in the

accessory kit. The installed label set and interior screen will provide the

best camera performance while balancing covert appearance issues, such

as reﬂection and light penetration from the other windows. The additional

(accessory bag) labels can be customer-applied if desired. You must be

willing to accept some honeycomb effect in the video at lower camera zoom

settings in order to cover up the tinted glass area of the windows.

Ventilation and Thermal Considerations

The Utility Box has a louvered exhaust vent on the back and a wire mesh

intake vent on the bottom of the enclosure. A cooling fan is mounted inside

of one of these ports. The cooling fan and heater run automatically to keep

the MiniBox-4 operating temperature between –20C (-4F) and +50C (122F).

Foam mesh

ﬁltration protects against water/dirt invasion.

Optional Analog and Digital transmitters feature a thermal shut-down

circuit to protect the transmitter if the inside of the MiniBox-4 gets too

hot. Always remove obstructions from the vents to ensure good air ﬂow.

Vacuum the bottom vent to remove excess dust, Remove the rear louvers,

clean and replace the foam ﬁlter if needed.

Do NOT block airow to vents at

back and bottom of MiniBox-4

N LOG