User Manual Part 2

DTC COMMUNICATIONS, INC.
16
OPERATION
Control Panel - All Models
Power LED The Power LED is ON or OFF to indicate that main power to
the MiniBox-4 is ON or OFF. The LED blinks briefly during power-up.
Push ON The Push ON button is a push-push master power ON/OFF
switch for the MiniBox-4 including accessories plugged into the outlets.
Always turn this master power ON/OFF switch to OFF before applying
power or plugging anything into the MiniBox-4 outlets.
AC Breaker Reset The AC Breaker Reset is a 5 Amp circuit breaker that
protects the outlets inside the MiniBox-4.
AC Power Reset The AC Power Reset is a circuit breaker that protects the
MiniBox-4 electronics.
Video Outputs The MiniBox-4 has two video output connectors on the
control panel. These are available for use with customer-supplied test
monitors, VCRs, or DVRs as desired.
Camera Connector The Camera Connector is a multi-I/O connector that
connects to the SONY IPELA camera.
Power LED
Push ON
AC Breaker Reset
AC Power Reset
Video Outputs
Camera Connector
A
N LOG
W
D