User's Manual

DTC COMMUNICATIONS, INC.
12
Output Attenuation
This control can be used to make minor adjustments to the output power
level, but in normal operation should not be changed from factory settings.
(0 attenuation = full output power, greater than 0 attenuation = reduced
power in 1 dB steps.)
Video Input
This control is used to select the composite video input standard. Options
are PAL, and NTSC both with and without 7.5 IRE black level pedestal.
PAL/NTSC should be selected according to the camera format. NO pedestal
is correct for most applications.
Video Bitrate (status only)
Displays data capacity for video channel.
Horizontal resolution
The video coding resolution can be selected from 704, 528, 480 and 352
pixels. For optimum performance, choose a resolution one step better than
your camera’s resolution.
Audio Encoder
Not available in this device.
PROGRAMMING
(As Desired)
NTSC
1.1
528
OFF
Default values are shown in red.
Advanced options are shown in blue. These
options are for trained and experienced technicians only.