Use and Care Manual

The Choice of Professionals
www.dtausagroup.com
DTA USA GROUP INC
230 South Vasco Road
Livermore, CA 94551
E: sales@dtausagroup.com
P: 925 371 7101
Use and care for UYBWMT Grout Bucket
1. DTA Bucket Grout System is designed to speed up the grouting
time and make the job easier.
2. Fill 6-gallon bucket with water above grate.
3. Use the handled sponge with the perforations which is
included in system. The perforations will allow the sponge to
pick up more sediment and remove from the tile surface.
4. Take dirty sponge and place over the bottom of grate and
push up and down to remove material.
5. The grout particulate will fall to the bottom of the bucket
leaving the clean water on top.
6. Run sponge over the rollers to remove excess water and
debris. Excess water can distort the grout. Be sure to push
the corners of sponge over the rollers to ensure proper water
removal.
7. Repeat process until tile is clean.
8. Dispose sediment properly.
9. Clean bucket thoroughly for the next use.

Summary of content (1 pages)