User's Manual

ManualsBrandsDT Research ManualsElectronicsMedical Cart Computer



DT590B/ DT592B/DT594B

BASIC OPERATION GUIDE

ENGLISH

INTRODUCTION

Thank you for acquiring DT Research’s medical cart computer medical cart computer. With a 19-inch,

22-inch or 24-inch TFT display and powered by the Intel Core™ i7 processor, the medical cart computer

offers optimal combinations of performance and power savings. With fully-integrated point-of-care modules

within an elegant, space-saving design, the medical cart computer is the optimum solution to enhance

workflow and service.

Please take a few moments to review the contents of this document to ensure that the setup and startup

proceed smoothly. The medical cart computer medical cart computer is ready for use, out of the box, in its

default configuration when powered by the power source provided. The following discussion offers guidance

on the hardware elements and features of the computer. Please refer to your device provider for information

pertaining to the software operating system or software applications.

Package Contents

One DT590B, DT592B or DT594B

Three DR202 Li-ion batteries (optional)

AC-DC power adapter with power cord

Basic operation guide



DT590B/ DT592B/ DT594B

Summary of content (7 pages)

PAGE 1
DT590B/ DT592B/DT594B BASIC OPERATION GUIDE ENGLISH INTRODUCTION Thank you for acquiring DT Research’s medical cart computer medical cart computer. With a 19-inch, 22-inch or 24-inch TFT display and powered by the Intel Core™ i7 processor, the medical cart computer offers optimal combinations of performance and power savings. With fully-integrated point-of-care modules within an elegant, space-saving design, the medical cart computer is the optimum solution to enhance workflow and service.
PAGE 2
I/O Ports: The medical cart computer has a comprehensive set of I/O ports. The following ports are located along the lower rear edge of the display unit. Cleaning the Screen: • A screen cleaning solution that is non-alcohol and non-abrasive can be used to clean the touch screen. • We suggest cleaning with a micro-fiber cloth. • Please spread the solution on to the cloth and then clean the touch screen.
PAGE 3
Precautions: Always exercise care when operating • and handling the medical cart computer. • Never disassemble any portion of the enclosure, as this will void any product warranty on the medical cart computer. • Do not use any AC/DC adapter other than the one provided with the device or a replacement acquired from the manufacturer. • In the unlikely event that smoke, abnormal noise or strange odor is present, immediately power down the medical cart computer and disconnect all power sources.
PAGE 4
Power/Battery LED Status • Blue indicates the battery is 25% to 100% charged • Blinking blue indicates the battery is charging • Orange indicates that the battery is between 11% to 25% • Blinking Orange indicates that the battery is below 10% Wireless Networking Wireless LAN The medical cart computer is often delivered with an embedded (user-inaccessible) 802.11ac WLAN adapter equipped with a hidden custom antenna.
PAGE 5
SPECIFICATIONS: Iten CPU RAM Storage Operating System Display Display Resolution Touch Screen Network Interface Bluetooth Control Buttons Speaker DT590B DT592B DT594B Intel® Core™ i7, 2.4GHz Intel® Core™ i7, 2.4GHz Intel® Core™ i7, 2.4GHz 4GB to 16GB 4GB to 16GB 4GB to 16GB 64GB to 256GB Flash 64GB to 256GB Flash 64GB to 256GB Flash Microsoft® Windows® 7 Professional 或 Windows® 8.1 Pro Industry 19" TFT-LCD 21.5" TFT-LCD 23.
PAGE 6
FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 7
RF Exposure Warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co‐located or operating in conjunction with any other antenna or transmitter. End‐users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.