Installation manual

®
DSX Access Systems, Inc. 10731 Rockwall Rd. Dallas TX 75238
800-346-5288 Voice 214 -553-6140 Voice 214-553-6147 Fax
WinDSX FAQ 12/10
 It doesn't really matter because once the input 7 has been disassociated with the
door the prewarn should not be used.
 When you are using two devices to control the same door (in and out readers on the
same door) the PreWarn (sounder) of the Side B reader could be connected to the
prewarn output on side A.
 PreWarn - During Locked period - Momentarily Unlock door (Card Read, REX
or Grant Access in Workstation) and prop door open. When Pre-Alarm starts
pulsing Unlock door via TZ (Regular schedule or Linking) or thru Workstation.
Pre-Alarm will continue to pulse.
If the door is shut before the Held Open Time expires the Pre-Alarm will turn off.
If the door is shut after the Held Open Time expires the Pre-Alarm will continue to
pulse.
The Pre-Alarm will keep pulsing until you Grant Access thru Workstation, activate
the REX input or use your card and get an Access Granted. Locking and Unlocking
the Output thru Workstation or via Time Zone will not stop the pulsing.