Quick Start Guide

 Basic system features continued…
Change the extension ringing
behavior
By default, all extensions will ring for a call on
each exchange line.
 To stop an extension ringing use:
 *9 7373 61 exchange-line 0 extension #
Replace exchange-line with the number of the
exchange line. Note: the first ISDN connection
uses lines 3 & 4, the second ISDN connection uses
lines 5 & 6.
 To start an extension ringing after a
programmable delay use:
 *9 7373 61 exchange-line, delay, extension
#
Where delay is a number from 2 – 9 in multiples of
5 seconds.
E.g. to ring after 20 seconds if a call is still
unanswered use
delay = 4.
 To return an extension to immediate ringing
(default) use:
 *9 7373 61 exchange-line 1 extension #
Do you want different ringing during the day and
night time?
 First set the period of the day to count as day
time:
*9 7373 371 start-time, end-time #
Between these times the system is in ‘day
mode’, and will ring as set above. For
night mode use these codes:
 Stop an extension ringing at night use:
 *9 7373 31 exchange-line 0 extension #
 To start an extension ringing after a
programmable delay during the night use:
 *9 7373 61 exchange-line, delay, extension#
 To return an extension to immediate ringing
during the night (default) use:
 *9 7373 61 exchange-line 1 extension #
Answering machine
 If an answering machine picks up a call then
it is possible to take the call back. To allow
this feature use this code:

*9 7373 455 extension #
Music on hold
There are three options for music on hold:
*9 7373 150# For standard tone (default)
*9 7373 151# For external music source
*9 7373 152# For internal melody
For an external music source connect its ‘Line out’
connector to a 3.5mm jack plug into the music on
hold socket on top of the case.
Fax machine
(Fax & voice card option)
This card allows an exchange line to be shared
between a fax and voice calls. Calls are
automatically answered with faxes sent to the fax
machine while voice calls will ring as normal.
 First, set the fax extension:
*9 7373 455 extension #
 Secondly, record a message for the caller such
as ‘Please send your fax now, otherwise wait
to be connected.’:
*9 7373 242#
Record your message at the tone, then hang up
gently.
 Finally, which exchange lines will faxes arrive
in on, use this code:
*8 45 exchange-line #
Repeat the code for each exchange line you wish
to automatically answer.
ISDN Settings (Option)
 If you have more than one number for an
ISDN line, the extra numbers can be used to
call extensions directly. Use this code:
*9 7373 0 extension 0 telephone-
number #
Repeat for each telephone number, using only one
number per extension.

*9 7373 455 extension #
The system is programmed and
ready to go
9
9
9
6
6
6
7
7
7
8
8
8
1
1
1
0
0
0