Operation Manual

Terminal User Guide
18
Flash Signal on External Line
Whilst on an existing call enter the code to send a recall
to the exchange line.
Flash Transparency
By dialling 84 instead of '0' to seize an exchange line
then any press of the recall key on the phone will be
sent out to the exchange line.
 With a flash transparency call it is not possible
to use any features which require the use of
the
key, including the programmable
keys.
 Calls should not be made for at least 3
seconds after replacing the handset on a call
with flash transparency.
Executive & Secretary Feature
The administrator is able to set up an 'Executive' and
'Secretary' extension. If calls are made between these
two extensions a buzzer in the Terminal will sound for
one second every five seconds, instead of the normal
ringing. The display will show if it is a ‘Boss call’ or ‘Sec
call’. The buzzer will sound even if the extension is
busy. The extensions used are as follows:
System size Executive Secretary
308 12 13
612 13 15
Answer Secretary / Executive call
Drop the current call and pick up the handset to
connect to the secretary / executive call.
The display will show
the call as a call from
the boss or secretary as appropriate.
 Note: this feature requires a Terminal to be
connected to both the Executive and
Secretary extension.
Extension Call Back
If the extension you are calling is busy, you may leave a
call back indication, sometimes called camping on an
extension. When the extension becomes free you will be
Ñ
ÑÑ
Ñ BUZZER Ò
ÒÒ
Ò
Sec call Thu 10:49
dial menu call 41