Operation Manual

Terminal User Guide
12
without the other parties being able to speak to, or hear
one another.
Add an extension
While on a call dialling * after transfer shows that the
call is to be used in a brokerage call.
Add an exchange line
While on a call dialling * after transfer shows that the
call is to be used in a brokerage call.
Switch between calls
With a brokerage call set up one press of transfer will
switch between the calls.
Removing caller from brokerage call
Hanging up will drop the current call, the phone will
ring back with the other call.
Call Diversion
This feature allows you to divert calls to another
extension. There are three different types of call
diversion.
Divert all calls, all the time.
Divert all calls if not answered after a number
of rings.
Divert calls when extension is busy.
Note that the first two diversion methods
cannot be set at the same time.
If your extension is set to divert calls to
another extension then the dial tone will
change to a broken tone to remind you that
you may not receive all calls.
Divert all calls
All calls to your extension will ring the new extension
instead.
Divert if no answer
Enter the diversion code then the extension number.
Enter the delay as follows: 2 = 10 seconds, 3 = 15
seconds … 9 = 45 seconds.
ext. no.
number
(9 for line) number
Ñ
ÑÑ
Ñ
RINGING
Ò
ÒÒ
Ò
ext.
or Extension Settings
p
pp
p Call diversion
p
pp
p Set divert all
delay, ext.
or Extension Settings
p
pp
p Call diversion
p
pp
p Set divert delay