Operating Instructions and Installation Instructions

Installation & Programming Manual
2
Detection, Call Logging, DISA, System Integral Call Answering, Remote programming and many
others, Figure 1-1 shows many of the options available.
The System supports approved single line telephones (DTMF or pulse), modems, facsimile and
answering machines. In addition a Standard and Executive Terminal are available which provide
extra features on the system. System capacity can be increased from 2+8 to a maximum of 6+12
using plug-in expansion cards.
System programming may be carried out at extension 13 using either a tone phone or the built in
menu commands of the Executive Terminal. A PC programming option is supplied with the
optional V24 expansion card.
There are two independent alarm loops which can be used to monitor the status of security doors,
gates and many other similar applications. Automatic external alarm calls (with voice messages if the
optional fax/voice card is fitted) can be made to programmed numbers such as mobile phones, in
the event that alarm contacts are triggered.
Figure 1-1 Expansion Options
System Capacity
Basic System Configuration
Feature Configuration
Alarm Loops 2
MOH Port Audio via 3.5mm jack
Internal hold tone
Internal Links 4 (Up to 4 internal calls)
Extension Speed Dial 10 Per Extension plus 1 last number redial, 25 digits
System Speed Dial 99 Per System, 25 Dialled Digits
Last Number Redial 25 Dialled Digits
Door phone ports 1 standard, 1 optional factory fitted
Control Contact (Door Latch) 1 standard, 1 optional factory fitted
Conference 3 Party Conference (All Combinations)
DISA All Exchange Line Ports, ISDN and PSTN
Power fail extensions 11, 12, 21 (Card 1 must be 2+2), 23 (Card 2 must be 2+2)
Maximum terminals 10 (Not power-fail extensions 11, 12)
DTMF Receiver 3 Per System
DTMF Sender 2 Per System
External music
on hold port
RS232 CDR output
Port and PC
program option
2 standard Alarm sensor inputs
plus 2 optionally factory fitted
External Paging output
Up to 2 Door phones
Up to 12 extension
p
orts
PSTN Exchange line
and ISDN ports
Calling Line Identity
& meter pulse card
option
Expansion card 1:
2+2 card with
extensions 21 & 22
and 2 analogue or
digital exchange lines
Expansion card 2:
2+2 card with
extensions 23 & 24
and 2 analogue or
digital exchange lines