Operating Instructions and Installation Instructions

Installation & Programming Manual
24
Feature Programming Codes Action
*9 PIN 771 number # Program Confirmation Number (4 digits max)
*9 PIN 71 type # Select Alarm loop 1 type
*9 PIN 72 type # Select Alarm loop 2 type
*9 PIN 7* type # Select Alarm loop type both loops
type=1: internal, 2:ext no conf., 3: ext with conf., 4: int
& ext no conf, 5: int & ext with conf., 6: day/night
switch, 7: social 1, 8: social 2
*9 PIN 244 # Record alarm loop 1 trigger notification message
*9 PIN 245 # Record alarm loop 2 trigger notification message
*9 PIN 246 # Record alarm code confirmation message
*8 73 x # Assign Tone/ Msg1/2 to Alarm 1 x=1/2/3
*8 74 x # Assign Tone/Msg1/2 to Alarm 2 x=1/2/3
*8 711 # Arm Alarm 1
*8 721 # Arm Alarm 2
*8 7 * 1 # Arm both Alarms
*9 PIN 710 # 710 # Disarm Alarm 1
*9 PIN 720 # 720 # Disarm Alarm 2
*9 PIN 7*0 # 7*0 # Disarm both alarms
*9 PIN 700 # 700 # Master Reset Security alarm settings to default
*9 PIN 730 # 730 # Reset Alarm 1 to default settings
*9 PIN 740 # 740 # Reset Alarm 2 to default settings
System PIN
Number
(p 49)
*5 OLD PIN NEW PIN # NEW
PIN#
Change system PIN Number and reset Power Fail LED
Indicator
*9 PIN 9991# Enter system programming mode
(Extension 13 hears special dial tone for 5 minutes. *9
PIN codes not needed at start of codes)
Special
Programming
Mode
(p 17)
9990# Exit system programming mode
*9 PIN 110# 110# System size 2 exchange lines, 8 extensions max
*9 PIN 111# 111# System size 4 exchange lines, 10 extensions max
System Size
(p 49)
*9 PIN 121# 121# System size 6 exchange lines, 12 extensions max
*9 PIN entry 0 tel no # Program system speed call number (entry = 501 to 599)
*9 PIN entry 0 # Clear system speed call number (entry = 501 to 599)
System Speed
Dialling
(p 49)
*9 PIN 500 # 500 # Clear all system speed call numbers
*9 PIN 24 X # Voice Message Recording from Extension 13 Voice Message
Programming
(p 50)
*8 24 X # Play back system message from Extension 13
Account Code Operation
Account code operation allows calls to be barred and logged depending on the user, not the
extension. An extension may be switched to 'account code mode', it will then require each user to
input the sequence: ** then 'account-pin' before making the external call in the normal manner. Up
to 40 different accounts may be set up.
Call detail logging will record the external call details with the user account number as well as the
extension number if the extension has account code operation enabled. See Call Detail Recording
(CDR) on page 35 for the format used.
Each extension may be separately configured to work with account code operation or work in the
standard manner. Only one PIN code may be assigned to each user account.