Operating Instructions and Installation Instructions

Section 3 – System Programming
23
Feature Programming Codes Action
*9 PIN 0100 num # Program ISDN base number, card 1
*9 PIN 0102 num Program ISDN base number, card 1 incl. # (wait 5sec for
conf. tone)
*9 PIN 0100# Clear ISDN base number, card 1
*9 PIN 0200 num # Program ISDN base number, card 2
*9 PIN 0202 num Program ISDN base number, card 2 incl. # (wait 5sec for
conf. tone)
*9 PIN 0200# Clear ISDN base number, card 2
*8 271# Enable CLIR for system
*8 270# Disable CLIR for system
*8 281# Enable COLR for system
*8 280# Disable COLR for system
*9 PIN 0 ext 0 num # Program MSN number to extension
*9 PIN 0 ext 2 num Program MSN number to extension, incl. # (wait 5sec for
conf. tone)
*9 PIN 0 ext 0 # Clear MSN number from extension
*9 PIN 0100# 0100# Clear all MSN numbers
*9 PIN 05 N 0 num # Program MSN number to ignore (N=1 to 8)
*9 PIN 05 N 2 num Program MSN number to ignore, including # (N=1 to 8)
*9 PIN 05 N 0 # Clear entry from MSN ignore table
*9 PIN 0500# 0500-# Clear all 8 MSN to ignore numbers
*8 291# Enable analogue line 1
*8 290# Disable analogue line 1
*8 200# Line selection analogue first then ISDN
*8 201# Line selection ISDN first then analogue
*9 PIN 150# Internal hold tone Music on Hold
(p 45)
*9 PIN 151# External music source
Reset System
(p 16)
*9 PIN 000# 000# Clock and PIN Code unchanged
*9 PIN 61 line delay ext # Add extension to ring on exch line during day
*9 PIN 61 line 0 ext # Remove extension from ringing on exch line during day
*9 PIN 31 line delay ext # Add extension to ring on exch line during night
*9 PIN 31 line 0 ext # Remove extension from ringing on exch line during night
*9 PIN 600 # 600 # Reset ringing to default (all extensions ring day & night)
*8 211 MSN_entry ext # Add an extra extension to ring on MSN number
*8 210 MSN_entry ext # Remove an extension from ringing on an MSN number
*8 351 group ext # Add an extension to ring in extension group
*8 350 group ext # Remove an extension from ringing in extension group
*8 3121 # Swap internal ring and external ring cadences
*8 3120 # Use normal internal and external ring cadences
*9 PIN 630 # Use standard exch line ring cadence on line 1
Ringing
Settings
(p 45)
*9 PIN 631 # Use alternate ring cadence for call on line 1
*9 PIN 73 x # Alarm Loop 1 Setting and Entry Time Delay
*9 PIN 74 x # Alarm Loop 2 Setting and Entry Time Delay
*9 PIN 781 ext # Add an extension to ringing on internal alarm
*9 PIN 780 ext # Remove an extension from ringing on internal alarm
*9 PIN 7510 number # Program external notification number 1
Security Alarm
Programming
(p 46)
*9 PIN 7520 number # Program external notification number 2