Operating Instructions and Installation Instructions

Installation & Programming Manual
22
Feature Programming Codes Action
*8 360 # Set day mode and disable automatic mode
*8 361 # Set night mode and disable automatic mode
*9 PIN 726 # Use switch on alarm loop 2 for day / night switching
*9 PIN 361 EXT # Set extension as DTMF only.
*9 PIN 360 EXT # Cancel extension as DTMF only.
*8 390 # Default recall window (40 – 160 ms)
DTMF
Extensions
(p 39)
*8 39 w # Recall window (w=1: 60 – 160 ms … w=5: 100 – 160ms)
*9 PIN 91 line 1 ext # Allow an extension to use an exchange line
(exch.=1…6 or 0 for all)
*9 PIN 91 line 0 ext # Prevent an extension using an exchange line
*8 911 # Enable Exchange Line Group feature
Exchange Line
Assignment
(p 39)
*8 910 # Disable Exchange Line Group feature
*8* ext. PIN # Set extension PIN number (3 digits) Extension
locking
(p 40)
*8* ext. # Reset to default extension PIN (any 3 digits allowed)
*9 PIN 840 number # Program call forward number
*9 PIN 841 number # Program and verify call forward number
*9 PIN 842 number Program call forward number including # and time out
*9 PIN 840 # Reset call forward number
*8 8NA # Switch on external call forwarding on line N
*8 8N0 # Switch off external call forwarding on line N
*8 871 # Enable call forwarding for the system
External Call
Diversion
(p 40)
*8 870 # Disable call forwarding for the system
*9 PIN 455 ext # Program ext. as a fax (no general calls, data protection)
*9 PIN 455 # Clear fax extension
*8 45 line 4 # Set fax monitoring on a line
*8 45 line ans_type # Set auto-answer monitoring on a line
Fax Call
Handling
(p 40)
*8 450 # Clear automatic fax answering
*8 23 delay #
Program call hold timeout delay (x 30s)
*8 221 delay #
Program call park timeout delay (x 30s)
*8 222 delay #
Program camp on call timeout delay (x 30s)
*8 224 delay #
Program extension ring timeout delay (x 15s)
*8 225 delay #
Program unannounced transfer timeout delay (x 15s)
Hold and ring
timers
(p 42)
*8 226 delay #
Program call back extension timeout delay (x 15s)
*9 PIN 660 number # Program immediate hot line number
*9 PIN 661 number # Program Immediate hot line number & verify
*8 661 EXT # Switch on immediate hot line & assign to an ext.
*8 660 # Switch off immediate hot line
*9 PIN 680 number # Program delayed hot line number
*9 PIN 681 number # Program delayed hot line number & verify
*8 681 EXT # Switch on delayed hot line & assign to an ext.
Hot Line
Programming
(p 42)
*8 680 # Switch off delayed hot line
*9 PIN 791 ext. # Enable extension paging and intrusion on busy calls. Intrude
Programming
(p 43)
*9 PIN 790 ext. # Disable extension paging and intrusion on busy calls.
*8 260# Set all ISDN cards point to point mode
(then switch off / on)
ISDN
Programming
(p 43)
*8 261# Set all ISDN cards to point to multipoint mode
(then switch off / on)