Operating Instructions and Installation Instructions

Section 3 – System Programming
21
Feature Programming Codes Action
*8 400 # Switch off automatic answering
*8 531 # Enable boss – secretary working Boss –
Secretary Mode
(p 32)
*8 530 # Disable boss – secretary working
*9 PIN 981 F 1 number # Program number prefix to bar filter F
*9 PIN 981 F 0 # Clear bar filter F
*9 PIN 96 CFX # Assign (X=1) / clear (X=0) bar filter F to class C
*9 PIN 9810 # 9810 # Clear all user programmable bar filters
*9 PIN 960 # 960 # Clear all bar filters from all classes
*9 PIN 982 F 1 number # Program "number" to exempt filter F
*9 PIN 982 F 0 # Clear exempt filter F
*9 PIN 9820 # 9820 # Clear all programmable exempt filters
*9 PIN 97 C F X # Assign (X=1) / clear (X=0) exempt filter F to class C
*9 PIN 970 # 970 # Clear all exempt filters from all classes
*9 PIN 95 C ext. # Assign class C for daytime operation to extension
*9 PIN 85 C ext. # Assign class C for nighttime operation to extension
*9 PIN 882 ac_no C # Assign class to user account
*9 PIN 950 ext. # Remove barring from an extension for day time
operation
*9 PIN 850 ext. # Remove barring from an extension for night time
operation
*9 PIN 900 # 900 # Clear all call barring user programmable data
Call Barring
(p 33)
*9 PIN 990 # 990 # Reset Call Bar settings to default data
*8 251 # Enable CDR format for a serial printer
*8 250 # Disable CDR printer format & enable PC mode
*8 3111 # Mask last 4 digits in CDR record
*8 3110 # Do not mask last 4 digits in CDR record
*8 323 ext # Output call details for hotel logging enabled extension
*8 3240 # Enable logging of standard extension calls at end of call
*8 3241 # Disable logging of standard extension calls
*8 321 ext # Enable hotel call logging for extension
Call Detail
Recording
(p 35)
*8 320 ext # Disable hotel call logging for extension
*8 510 # Disable the call waiting tone Call waiting
tone
(p 37)
*8 511# Enable the call waiting tone(default)
*8 951 xxxx # Set the metering unit cost in tenths of a currency unit,
e.g.: 8324 = $8, 32.4c.
Call Unit Cost
(p 35)
*8 951 0000 # Clear the unit cost and count unit meter pulses only.
*9 PIN 675 HH MM # Setting the time in 24 Hour / Military Format Clock Setting
(p 37)
*9 PIN 676 DD MM YY # Setting the date.
*9 PIN 242 # Record answer message 1 (fax/voice card option)
*9 PIN 243 # Record answer message 2 (fax/voice card option)
*8 48 L delay # Switch on courtesy service and answer after delay secs.
*8 48 L 0 # Switch off courtesy service on line L
*8 491 ext # Assign single extension for courtesy service ringing
Courtesy
Service
(p 37)
*8 490 # Cancel single extension for courtesy service ringing
*9 371 # 371 # Clear current day-night zone settings
*9 PIN 371 hhmm HHMM# Program day zone which is used in Automatic mode
Day/Night
Mode
(p 38)
*8 371 # Switch on automatic day/night switching