Specifications

GigMAC-CPCI-3U Network Interface Cards
Gig-CPCI-3U Gigabit Ethernet Switches Board and Driver Users Manual
DSS NETWORKS, INC. DocVersion: 1.2 Page: 11
Model C5263-SFP dual-port (fiber, copper)
The front panel has two onboard SFP connectors that support the connection of
singlemode or multimode fiber optics or 1000-Base T transceivers with 4 LED indicators
per port that provide the following as marked with silkscreen nomenclature on front
panels:
 LED_1000 (1000 Mb mod)
 LED_FD (full-duplex mode)
 LED_TX (transmit activity)
 LED_RX (receive activity)
Model C5164/C5264 quad-port 3U CPCI with RJ-45 connector(s)
The front panel has four onboard RJ-45 connectors that support the connection of
Category 5e cabling with 1 LED indicator per port that provides both a “link” and
“activity” indicator as follows:
 OFF (no link)
 ON (link)
 BLINKING (link and activity)
Model C5468 Gig 3U CPCI Switch with 4-port RJ-45 connector(s)
The front panel has four onboard RJ-45 connectors that support the connection of
Category 5e cabling with 1 LED indicator per port that provides both a “link” and
“activity” indicator as follows:
 OFF (no link)
 ON (link)
 BLINKING (link and activity)