User Manual
Table Of Contents
- DSS NETWORKS
- GigMAC PMC/PCI Controllers
- Document Version 2.0, P/N 131900
- 1. INTRODUCTION
- 1.1 SEE ALSO
- 1.2 COMPATIBILITY
- 2. MODEL NUMBERS
- 3. FEATURES
- 4. OEM DEVELOPER KIT CONTENTS
- 5. SYSTEM REQUIREMENTS
- 6. BOARD AND CONNECTOR INFORMATION
- 6.1 BOARD PHOTOS
- 6.2 BOARD LED INDICATORS
- 6.3 PMC CONNECTOR PIN/SIGNAL DEFINITIONS
- 7. POWER CONSUMPTION SPECS
- 8. HARDWARE INSTALLATION
- 8.1 INSTALLATION IN PC COMPUTER
- 8.2 EMBEDDED OR COMPACT PCI INSTALLATION
- 9. COPPER CABLING AND CONNECTOR INFO
- 9.1. FIBER CABLE SPECIFICATIONS
- 9.2 COPPER RJ-45 CONNECTOR AND CABLE
- 10. SOFTWARE DRIVER INSTALLATION
- 10.1 VXWORKS DRIVER INSTALLATION AND USAGE
- 10.2 LINUX DRIVER INSTALLATION AND USAGE
- 10.3 DPM DRIVER MANAGEMENT API
- 10.4 WINDOWS DRIVER INSTALLATION
- 11. TESTING AND VERIFICATION
- 12. SPECIFICATIONS
- 13. WARRANTEE AND SUPPORT INFO
GigMAC PMC and PCI Board and Driver Users Manual
Windows Explorer. In a Windows environment, you can also use the
Windows explorer to access files on other systems within your Workgroup or
Domain.
Blaster / blastee can be used to perform TCP throughput tests between
VxWorks, Linux and Windows platforms. These test programs are included on
the OEM developer CD.
Internal loopback: The vxWorks and Linux drivers can be placed into
internal loopback for a full-speed raw driver and controller throughput test.
This is very useful for getting a baseline throughput measurement and also
for verifying the robustness of the controller and driver in your system.
12. SPECIFICATIONS
Connector (Models 5161, 5162, 5261-RJ, 5262-RJ, 5164, 6161, 6162): Gigabit
Ethernet (1000BaseT, 100BaseTX, 10BaseT): RJ-45 CAT5
Connector (Model 7160, 6167 Fiber): SC or LC connector type for 50 and 62.5
micron multimode fiber.
Connector (Model 5261-LC, 5262-LC Fiber): LC connector type for 50 and 62.5
micron multimode fiber.
Drivers:
Microsoft Windows 2000 Professional
Microsoft XP Embedded
Linux 2.4 (all versions)
Tornado 2.0.2 and Tornado 2.2 (VxWorks 5.4/5.5)
Status Indicators (models 5161 and 6161, 6167): 1000 Mbps Link, 100 Mbps
Link, 10 Mbps link, Full-Duplex, Transmit and Receive Activity
Status Indicators (model 7160 fiber): Signal Detect, Link, Transmit and
Receive
Status Indicators (model 6162 PCI): Link, Activity, 1000 Mbps, 100 Mbps
Status Indicators (model 5162 PMC): 1000 Mbps, 100 Mbps. Transmit and
Receive
Status Indicators (model 5164 PMC): Link/Activity (all four ports)
DSS NETWORKS, INC.
Version: 2.0 Page: 30