User`s manual

6
Eternalight 1 Online Emergency Lighting Inverter User’s Manual
#018-0135-01 Rev C
Technical Assistance
Safety Recommendations: If any problems are encountered while following this manual, DSPM assistance and
correspondence is recommended. For technical support or help with any questions not covered in the manual,
contract.
DSPM Inc.
1921 S. Quaker Ridge Place
Ontario, CA 91761
Work Hours: 8 a.m. – 5 p.m. Pacific Standard Time
Phone:1(877) DSPM POWER
1(877) 377-6769
After Hours: 5 p.m. – 1 a.m. Pacific Standard Time
1(951) 840-0811
Fax: [phone]
Email: [e-mail]
Internet: http://www.DSPManufacturing.com
To expedite assistance if required, Please have the following information from your unit’s System Label
(found on the right side and inside door panel) available:
Model:
Model Number:
S/O Number:
Input Voltage:
Output Voltage:
Power Rating and Frequency:
About this Manual
Thank you for selecting this Emergency Lighting Inverter System (ELI). It provides you with perfect protection for
connected loads and equipment. This manual contains Important instructions that should be followed during
maintenance of the DSPM Uninterruptible Power Supply. It includes important safety and maintenance instruc-
tions for operating the Emergency Lighting Inverter System. If you should have any problems with the Emer-
gency Lighting Inverter System, please refer to this manual and/or call technical support.
Your DSPM Uninterruptible Power Supply is designed to provide reliable protection from power disturbances for
many years. Please be sure to follow the manufacturers instructions to ensure optimum performance of the
equipment. This manual contains descriptions of all controls and indicators required to operate the DSPM Unin-
terruptible Power Supply. Please read this manual carefully and retain it for future reference.
To the best of our knowledge and at the time written, the information contained in this document is technically cor-
rect and the procedures accurate and adequate to operate this instrument in compliance with its original advertised
specifications. While every precaution has been made to ensure accuracy and completeness in this manual,
DSPM assumes no responsibility and disclaims all liability for damages resulting from the use of this information
or for any errors or omissions.
This instrument is designed to prevent accidental shock to the operator when properly used. However, no
engineering design can render safe an instrument which is used carelessly. Therefore, this manual must be
read carefully and completely before making any measurements. Failure to follow directions can result in a serious
or fatal accident.
How to use this Manual
This manual is designed for ease of use, giving the user easy and quick reference to information. This manual uses
notice icons to draw attention to the user important information regarding the safe operation and installation of the
UPS. The notice icons used in this manual are explained below, and should be taken into account and adhered to
whenever they appear in the text of this manual.