User`s manual

Eternalight 1 Online Emergency Lighting Inverter User’s Manual

#018-0135-01 Rev C

SECTION 3.1. MOTHER/MAIN BOARDS 17

SECTION 3.2. ALL OTHER PARTS 17

CHAPTER 4 TRANSPORTATION, INSPECTION, AND INSTALLATION 18

SECTION 4.1. HOW TO TRANSPORT THE SYSTEM 18

SECTION 4.2. INSPECTION 18

SECTION 4.3. LOCATION AND PLACEMENT 18

FIGURE 5—UPS DIMENSION DRAWING 19

CHAPTER 5 DESCRIPTION 19

SECTION 5.1. DESCRIPTION OF UPS CABINET/S 19

SECTION 5.2. DESCRIPTION OF AC INPUT AND AC OUTPUT TERMINALS BLOCKS 19

SECTION 5.3. MANUAL BYPASS SWITCH DESCRIPTION 19

FIGURE 6—MANUAL BYPASS SWITCH 20

SECTION 5.4. INPUT AND OUTPUT POWER REQUIREMENTS/CONNECTIONS 20

SECTION 5.5. SYSTEM CURRENT RATINGS 20

SECTION 5.6. GROUNDING 20

CHAPTER 6 INSTALLATION 20

SECTION 6.1 INSTALLING BATTERIES 20

FIGURE 7—BATTERY CONNECTION 21

SECTION 6.2. INPUT POWER CONNECTIONS 22

SECTION 6.3. OUTPUT POWER CONNECTIONS 22

FIGURE 8—INPUT/OUTPUT CURRENT RATINGS 23

SECTION 6.4. COMMUNICATIONS INTERFACE 24

FIGURE 9—COMMUNICATION INTERFACE 24

CHAPTER 7. DISPLAYS 25

SECTION 7.1 FRONT PANEL DESCRIPTION 25

CHAPTER 8 OPERATION AND PROCEDURE 26

SECTION 8.1. START-UP PROCEDURE 26

SECTION 8.2. SHUT-DOWN PROCEDURE 26

SECTION 8.3. BATTERY RUN AUDIBLE ALARM 26

SECTION 8.4. LOW BATTERY (RAPID ALARM) 26

CHAPTER 9. SYSTEM OPTIONS 27

SECTION 9.1. UNIT OPTIONS 27

SECTION 9.2. SERVICE PROGRAM DESCRIPTIONS 30

TABLE 2—SERVICE COVERAGE 32

CHAPTER 10. APPENDIXES 33

TABLE 3—TROUBLESHOOTING 33

FIGURE 11a—f — PERFORMIX PLASTI DIP PROCESS 34

FIGURE 12a b —ETERNALIGHT 1 SYSTEM LAYOUT 35

SECTION 10.1. LIMITED WARRANTY 36

SECTION 10.2. NOTES 39