User`s manual

Eternalight 1 Online Emergency Lighting Inverter User’s Manual

#018-0135-01 Rev C

2. USE TOOLS WITH INSULATED HANDLES.

3. WEAR RUBBER GLOVES AND BOOTS.

4. DO NOT LAY TOOLS OR METAL PARTS ON TOP OF BATTERIES.

5. DISCONNECT CHARGING SOURCE PRIOR TO CONNECTING OR DISCONNECTING BAT-

TERY TERMINALS.

DETERMINE IF BATTERY IS INADVERTENTLY GROUNDED. IF SO,

RE-

MOVE THE SOURCE OF THE GROUND. CONTACT WITH ANY PART OF

GROUNDED BATTERY CAN RESULT IN ELECTRICAL SHOCK. THE

LIKE-

LIHOOD OF SUCH SHOCK WILL BE REDUCED IF SUCH GROUNDS

ARE RE-

MOVED DURING INSTALLATION AND MAINTENANCE.

LEAD-ACID BATTERIES CAN PRESENT A RISK OF FIRE BECAUSE THEY

GENERATE HYDROGEN GAS. THE FOLLOWING PROCEDURES SHOULD

FOLLOWED:

 DO NOT SMOKE WHEN NEAR BATTERIES.

 DO NOT CAUSE FLAME OR SPARK IN BATTERY AREA.

DISCHARGE STATIC ELECTRICITY FROM YOUR BODY BEFORE

TOUCH-

ING BATTERIES BY FIRST TOUCHING A GROUNDED SURFACE.

CAUTION

IN CASE OF FIRE INVOLVING ELECTRICAL EQUIPMENT. ONLY CARBON

DI-

OXIDE FIRE EXTINGUISHERS, OR THOSE APPROVED FOR USE ON ELECTRI-

CAL EQUIPMENT, SHOULD BE USED. USE OF WATER ON FIRES

INVOLVING

LIVE HIGH VOLTAGE ELECTRICAL CIRCUITS COULD PRESENT AN

ELECTRO-

CUTION HAZARD

ANGER

TO REDUCE THE RISK OF ELECTRICAL SHOCK; DISCONNECT THE EMER-

GENCY LIGHTING INVERTER SYSTEM FROM THE MAIN SUPPLY BEFORE IN-

STALLING AN INTERFACE SIGNAL CABLE. RECONNECT THE POWER ONLY

AFTER SIGNALING INTERCONNECTIONS HAVE BEEN MADE.

DO NOT DISMANTLE THE EMERGENCY LIGHTING INVERTER SYSTEM.