User`s manual

Phone: [phone] Fax: [phone]
Service: [phone]
Web Page: www.DSPManufacturing.com
Email: [e-mail]
16
BATTERY SYSTEM TEST
1. Make sure A.C. input circuit breaker is OFF.
2. Make sure battery circuit breakers are OFF.
3. Use a meter and note the D.C. voltage at the battery circuit breaker. The voltage
must be the correct polarity positive lead of the meter to the positive terminal of
the circuit breaker.
4. The D.C. voltage should be 12 and 13.2 volts times the number of battery
provided (See battery diagram). If the D.C voltage reads below these figures, the
battery cables are not connected correctly.
5. If the battery polarity and voltage level are correct, proceed to section 3.0.
Battery Circuit
Breaker