Specifications

DSPEAKER SERVO 300
4 Technical specification
Technical specifications:
Operating principle: Active suspension
Power supply: 230V 50Hz (EU)
110V 60Hz (US)
Amplifier power (continuous): 90W + 90W
Amplifier type Linear, current-feedback
Input sensitivity: Line level (max 1.1 Vrms)
Input connections: Balanced XLR (RCA with adapter)
3.5mm Anti-Mode
TM
microphone jack
Bass driver: 6.5” Aluminium, long throw
Tweeter: 27mm Aluminium/Magnesium, DXT-lens
Frequency response (1m): 32 - 21000Hz (-6dB)
Harmonic distortion 85dB/1m <0.1% @1kHz
Dynamic range (unweighted): >90dB
DSP VS8053
DSP functions:
DSP core VSDSP4 8053
Digital Cross-over: 2150Hz, Linear-Phase
Anti-Mode
TM
correction range 24 – 152Hz
Anti-Mode
TM
resolution <0.5Hz
Anti-Modal filters 6
Digital equalizers 45-20000Hz (±1dB) on axis
Time-domain EQ resolution ~20µs
Total latency (group delay) ~12ms
ASCM correction range ±11mm excursion
5 Manufacturer
VLSI Solution Oy / DSPeaker Division
Hermiankatu 8 G
FIN-33720 Tampere
FINLAND
Fax: [phone]
Tel: [phone]
Email: [e-mail]
URL: http://www.dspeaker.com/
6 Support
[e-mail]
[e-mail]
Rev. 1.6 21.06.2010 Page 16 (16)