User`s manual

ANTI-MODE 8033 CINEMA / 8033S-II
7. Technical Specifications
Electrical characteristics:
Power consumption: 1.2 W
Input sensitivity: Line level (1.0 Vrms nominal, 1.75 Vrms max)
Amplification: 3.0 dB (bypass)
Operation voltage: 9 VAC or 12 VDC
Low-pass (analog): Bessel 12 dB / octave, Q ~ 0.5, fc = 250 Hz
8033 cinema 8033S-II
Frequency range (-3 dB): 5 – 160 Hz 5 – 250 Hz
Dynamic ratio (unweighted): > 90 dB > 92dB
Firmware features:
Frequency resolution: < 0.5 Hz
Maximum attenuation: 96 dB
Filter Q-value range: Unlimited (32-bit integer space)
Sub-sonic filter: 10 Hz (user-selectable)
Computation accuracy: 32 / 40-bit integer
Latency: 2.7 ms
8033 cinema 8033S-II
Anti-Mode-Filters: 28 36
Correction range: 16 – 160 Hz 16 – 250Hz
Lift filters: 20Hz, 30Hz 20Hz, 25Hz, 30Hz
Lowpass filters: - 7 selectable modes
8. Manufacturer
VLSI Solution / DSP eaker Division
Hermiankatu 8 B
FIN-33720 Tampere
FINLAND
Fax: [phone]
Tel: [phone]
Email: [e-mail]
9. Contact
Website: http://www.dspeaker.com/
Technical Support: [e-mail]
Product Information: [e-mail]
Rev. 2.0 18.06.2012 Page 20 (20)