Owner`s manual

ANTI-MODE 2.0 DUALCORE
OWNER'S MANUAL
2.4 Typical Room Calibration
Typical calibration is the default process, where the listening room is analyzed and
corrected automatically. The optimal frequency limit of the correction is automatically
detected based on the room response.
➢ Press MENU on the remote controller. The main menu screen appears.
➢ Use the arrow buttons to highlight the Calibration menu item and press the OK
button to select it.
➢ Press OK to accept the Typical calibration mode (The Advanced mode allows more
options to choose from. That and Multi-point calibration will be described later in this
manual.)
➢ The speaker configuration screen appears. Use the arrow buttons to select the
option that best matches your speaker setup. If you are unsure, select the 2.0
Stereo configuration. Press OK to confirm the selection.
➢ The microphone check screen appears. At this point, plug in the provided calibration
microphone to the microphone jack and position it at the primary listening spot. The
microphone should be positioned at ear height, with no reflective surfaces near the
tip and fixed in place.
Rev. 1.1 2014-03-07 Page 7 (32)
MAIN MENU
Calibration
Multi-point
2.0 CALIBRATION
Typical
Advanced
CONFIGURATION
2.0 Stereo
PREPARE MIC
Volume OK
S/PDIF OUTPUT
MIN MAX