Owner`s manual

ANTI-MODE 2.0 DUALCORE
OWNER'S MANUAL
11.Technical Specifications
11.1 Interfaces
• 2 x RCA inputs or alternatively 2 x XLR inputs
• 2 x RCA outputs and 2 x XLR outputs
• Toslink S/PDIF digital input (2-channel PCM only, maximum rate 96 kHz)
• Toslink S/PDIF digital output (48 kHz)
• USB Audio (USB used also for measurement export and software update)
• Microphone jack, power connector, DSPeaker Datalink
11.2 Analog Specifications
• Dynamic Range: > 108dB
• Total Harmonic Distortion (analog in, analog out, typical): 0.003%
• Analog Volume Control Step: 0.5dB
• 2012 edition:
◦ Input Sensitivity RCA: 1.6 / 3.25 Vrms, XLR: 1.3 / 2.6 Vrms
◦ Output Voltage RCA: 1.65 Vrms (max), XLR: 3.25 Vrms (max)
◦ Power consumption 9VAC / 12VDC (typical): active 2.6W, stand-by 0.6W
• 2013 edition:
◦ Input Sensitivity RCA: 2.5 / 5.0 Vrms, XLR: 3.9 / 7.9 Vrms
◦ Output Voltage RCA: 7.2 Vrms (max), XLR: 14.4 Vrms (max)
◦ Power consumption 12VDC (typical): active 4.5W, stand-by 0.8W
11.3 Firmware Specifications
Firmware specifications are subject to change between firmware versions.
• Digital Signal Processing: 40 bits, 2 channels
• Anti-Mode 2.0 Multi-Rate (FIR & IIR)
• House Curve, Linear-Phase Tilt, Parametric EQs, Adjustable Infrasonic Filter
• Toslink S/PDIF input: 24-bit 32 / 44.1 / 48 kHz and 88.2 / 96 kHz compatible
• USB input: 24-bit 44.1 / 48 kHz
12.Contact
Website: http://www.dspeaker.com/
Technical Support: [e-mail]
Sales Support: [e-mail]
Rev. 1.1 2014-03-07 Page 32 (32)