Owner`s manual

ANTI-MODE 2.0 DUALCORE
OWNER'S MANUAL
4.10 Factory Reset
The Factory reset menu lets you clear data stored on the active sound profile, or
alternatively clear all user data stored on the device. Use with caution: this
operation cannot be undone.
4.11 Information
Use this menu to display firmware version, CPU usage information, and board revision.
4.12 PC Link
By selecting “PC Link”, you can export the measurements of the currently selected
profile to a PC or Macintosh computer via USB. In this mode, Anti-Mode 2.0 Dual Core
will appear as a removable drive once connected to the computer. You can copy the
measurement files (in ascii/text format) that can be imported to popular PC / MAC
measurement programs. The measurement files are named accordingly to indicate the
profile and the measurement type.
✔ ”a-after.txt” - the automatically generated response after the Anti-Mode room
correction
✔ ”a-before.txt” - the automatically generated original room response without
correction
✔ ”a-user1.txt” - the user-made measurement
✔ ”a-user2.txt” - the secondary user-made measurement
In the above example, the default profile A was active. To export measurements stored
in another sound profile, activate the corresponding profile before entering PC Link
mode. The names of the files will change to reflect the profile, e.g. ”b-after.txt” etc.
System update is also performed in the “PC Link” mode. The system update requires
separate computer software which is currently available for Windows only. Visit
www.dspeaker.com for more information.
Rev. 1.1 2014-03-07 Page 22 (32)