Owner`s manual

ANTI-MODE 2.0 DUALCORE
OWNER'S MANUAL
USB Volume controller defines how the volume is controlled during USB audio mode.
By Remote keeps the volume control in the hands of the user. In this mode the PC
does not control the volume. By selecting By Computer you allow the PC to control the
volume, and the volume control buttons are just reported to the PC through HID
(human interface device). It is upto the PC to interpret the buttons and perform the
appropriate action.
Please note that selecting By Computer may cause a high volume to be set from the
PC, so be careful in this mode, especially when you connect Dual Core to the PC for
the first time.
The Volume trim menu allows compensation of different volume levels between the
digital and analog inputs. For example, if the digital input is subjectively louder, adjust
the volume trim value towards the left side until the volume levels are equal. Changes
in this dialog take effect immediately. Press the OK button on the remote to accept the
new adjustment or press the BACK button to discard changes.
The Input sensitivity setting adjusts the maximum allowed voltage level of the analog
input. Default value is high sensitivity. Use the low sensitivity setting, if you connect a
device which produces very high voltage levels (indicated by a clipping warning on the
home screen).
Notice: Input sensitivity and volume trim are global settings, i.e. the values are shared
by all four sound profiles.
4.9 Language Selection
”Language” allows for changing the menu language. Currently available languages are
English, Finnish, Swedish, Dutch, and German. More translations may be added in
future firmware revisions.
Rev. 1.1 2014-03-07 Page 21 (32)
In-Sens: Low
USB Volume
INPUT SETTINGS
Volume Trim
VOLUME TRIM
Close
ANALOG S/PDIF
00.0 dB
USB VOLUME CTRL
By Computer
By Remote