Owner`s manual

ANTI-MODE 2.0 DUALCORE
OWNER'S MANUAL
(3) House curve indicator
(4) Tilt curve indicator
(5) Lowpass or highpass indicator
(6) Custom EQ indicator
(7) Infrasonic filter indicator
(8) Speaker configuration indicator
(9) The Currently active sound profile (designations “A” to “D”). Press the corres-
ponding button on the remote to select a new active sound profile. See the ”Using
Sound Profiles” section for further information.
➢ Press the INPUT button on the remote to switch the active input (source).
➢ Press the OUTPUT (green-coded) button to switch between the digital and analog
output modes.
➢ Press the BYPASS (orange-coded) button on the remote to toggle the room
correction on and off. The background of the home screen turns red when Anti-Mode
room correction is NOT active.
➢ Press the DISPLAY (blue-coded) button on the remote to toggle screen dimming.
The dimmed mode is less obtrusive with much less information on display. Keep the
DISPLAY button pressed for 2 seconds to turn off the display completely.
➢ Press the MENU key to enter main menu.
➢ By default, the arrow keys are bound to QuickTone actions: press UP / DOWN to
adjust the bass, LEFT / RIGHT to adjust the treble. You can re-assign the arrow keys
to various functions (QuickTone, input select and playback controls) using the
Homescreen settings menu.
QuickTone can be used to perform full-spectrum sonic adjustments conveniently from
the home screen. This can be useful e.g. when the user wants to quickly compensate
for too bright or subdued recordings. When QuickTone controls are used, the applied
curve is briefly shown on the screen as a simplified shape of the target frequency
response. You can adjust the curve between flat (no curve) and very strong curve
using 1dB steps.
Rev. 1.1 2014-03-07 Page 11 (32)