User manual

Eline User Manual
Page 13 of 16
Copyrights DSP4YOU ltd
3.2.3.1 Analog input control
3.2.3.2 Analog output control
3.2.3.3 Parametric Equalizer (PEQ) control
Up to 6 bands of PEQ on each input/output section is available. For each band, the typical PEQ settings go as follow:
o Frequency (Freq): Using the slider or text box, enter the center frequency of the PEQ filter
o Gain: controls the boost or dip of the equalizer
o Q: Controls the number of octaves over which the filter affects the signal.
o Bypass: Control on a per band basis whether the PEQ is enabled or not.
At any times during the tuning, one can easily mouse over the curve to provide a real time reading of the value.
Fader controlling the
digital input gain
RMS meter displaying the
input level in dBu
Input mute
Polarity Invert
Analog Gain control.
Selection from 0/36/48dB
Phantom Power control.
Toggles phantom power
for both input channels
Digital Output gain control
RMS output meter in dBu
Output mute
Polarity Invert
Output delay: 0 to 7.5ms