User manual

AV2USB
Page 12 of 24
Copyrights DSP4YOU ltd
As displayed on the screenshot, the AV2USB is currently locked at 48kHZ sample rate which is a common sample rate
for most AVB products currently shipping on the market.
3.2.4 Input channel volume control (recording)
This panel is self explanatory but here is some basic information of the control available:
o 1 x Master volume control for all 8 input channels
o 8 x volume controls for all AVB input channels coming from the Network
Note that controls of each channel pair can be linked (stereo case) or unlinked (mono).
The M button is equivalent to the Mute button.
3.2.5 Output channel volume control (playback)
This panel is self explanatory but here is some basic information of the control available:
o 1 x Master volume control for all 8 output channels
o 8 x volume controls for each AVB outputs channels from PC to the Network
3.2.6 Clock source
This panel just confirms that the clock source is from the AVB network which is the way you would expect. Being an
Asynchronous USB audio device (clock coming from USB audio endpoint), it’s not possible to select another clock
source (e.g. PC).