User manual

Programs

TPS400-5.0.1en

Procedure

1. Measuring points defining the reference plane

Input the name of the first point on the reference

plane and the height of the reflector. Measure the

point.

Repeat this for the second and the third point on the

reference plane.

[FIND] Starts point search. Exact PtIDs can

be entered or the * wildcard-criteria

used.

[LIST] Displays the list of available points.

[ENH] Opens the coordinate input mode.

2. Measuring target point

Measure a target point as you usually survey points.

3. Results

Int. PtID: Point ID of the intersection point,

the perpendicular projection of the

target point on the plane.

ALL FIND LIST

PLANE 1/3

Measure 1st plane point !

Point 1 : A1

Point 2 : -----

Point 3 : -----

hr : 1.500 m

: -----.--- m

PLANE RESULT 1/2

Int.PtID : 104

X : 1.380 m

Z : 4.500 m

: 2.000 m

NewTgt STAKE NewPlan EXIT