User manual

79
Programs
TPS400-5.0.1en
Remote Height
Points directly above the base prism can be deter-
mined without a prism at the target point.
1) Remote point
2) Height diff.
3) Slope distance
4) Base point
Procedure:
1. Input PtID and reflector height
[ALL] Starts measurement to base point
and continues to 2.
[hr?] Starts the program that determines
an unknown reflector height.
2. Aim at inaccessible height point
[OK] Saves the measured data.
[BASE] Input and measurement of a new
base point.