User manual

77
Programs
TPS400-5.0.1en
1. Determine area points
[ALL] Starts the measurement to the
point.
[FIND] / Searches for point in internal
[LIST] memory.
[ENH] For manual input of the coordinates.
[1PtBACK] Undo measurement or selection of
last point.
)
The area (2D) is calculated and displayed
once three points have been measured or selected.
The area (3D) is calculated once the sloped refer-
ence plane is defined by three points.
2. Results
[Def. 3D] To define the sloped reference
plane by selecting or measuring
three points.
[VOLUME] To calculate a volume with constant
height. The height have to be
entered or measured.
[RESULT] To display and record additional
results (perimeter, volume).
)
Perimeter and volume are updated if
further area points are added.
)
The graphic shows always the area
projected onto the horizontal plane.