User manual

73
Programs
TPS400-5.0.1en
+
S The stake out point is higher than the
measured point.
Warnings / Messages
Tie Distance
The application Tie Distance computes slope
distance, horizontal distance, height difference and
azimuth of two target points measured online,
selected from the Memory or entered using the
Keypad.
The user can choose between two different
methods:
Polygonal (A-B, B-C)
Radial (A-B, A-C)
Polygonal Method:
Important
Messages
Meaning
Save via
RS232 !
Data output (system setting menu) via
RS232 interface is activated. To be able
to succesfully start reference line, the
"INTERN" setting must be enabled.
Base line too
short !
Base line is shorter than 1 cm. Choose
base points such that the horizontal
separation of both points is at least 1 cm.
Coordinates
invalid !
No coordinates or invalid coordinates for
a point. Ensure that a point used has at
least one Easting and one Northing co-
ordinate.