User manual

Programs

TPS400-5.0.1en

Example "relative to first reference point"

1RP: 1st reference point

1BP: 1st base point

RH: Reference height

Hd: Height difference between reference and

base point

SH: Height difference from reference height

5. "Stake out" subapplication

You can enter longitudinal, parallel and height

offsets for the target points to be set-out relative to

the reference line. The program calculates the differ-

ence between a measured point and the calculated

point. The program displays the orthogonal (SLine,

SOffset, S ) and the polar (SHz, S ,

S ) differences.

Procedure:

1. Input the orthogonal stake out elements.

2. [OK] Confirm entry and start calculation.

SH+

SH-

1BP

1RP

Hd+

TPS800_Z39