User manual

Programs

TPS400-5.0.1en

Reference Line

This program facilitates the easy stake out or

checking of lines for buildings, sections of road,

simple excavations, etc.

A reference line can be defined by referencing a

known base line. The reference line can be offset

either longitudinally, in parallel or vertically to the

base line, or be rotated around the first base point as

required.

Procedure:

1. Definition of the Base line:

The base line is fixed by two base points that can be

defined in three ways:

• Measured points

• Enter coordinates using keypad

• Select point from memory.

a) Measuring base points:

Input PtID and measure base points with [ALL]

or [DIST] / [REC].

b) Base points with coordinates:

[FIND] Starts to search for the PtID

entered.

[ENH] Manually input coordinates.

[LIST] Displays the list of available points.

Analogue procedure for the second base point.

1) 1st base point

2) 2nd base point

3) Base line

4) Reference line

TPS800_Z36