User manual

58
Programs
TPS400-5.0.1en
Stake out
This program calculates the required elements to
stakeout points from coordinates or manually
entered angles, horizontal distances and heights.
Setting out differences can be displayed continu-
ously.
Setting out coordinates from memory
Procedure:
Select the point.
[DIST] Starts measurement and calculation of
the stake-out elements.
[REC] Saves the displayed values.
[B&D] Input direction and Hz-distance of stake
out point.
[MANUAL] Enables simplified input of a point
without PtID and without the possibility
of storing the data of the point.
Polar Stake out
Normal indication of polar stake out offsets SHz,
S , S .
1) Actual
2) Point to be stake out
SHz: Angle offset: positive if point to be set-
out is to the right of the actual direction.
S : Longitudinal offset: positive if point to be
stake out is further away.
S : Height offset: positive if point to be
stake out is higher than measured point.