User manual

52
Programs
TPS400-5.0.1en
Orientation
With the orientation, Hz-direction can be input
manually or points with known coordinates can be
set.
Method 1: Manual input
1. To input a random Hz-orientation.
2. Input of Hz-direction, reflector height and PtID.
3. [ALL] Triggers measurement and sets
orientation.
[REC] Records Hz-direction and sets
orientation.
Method 2: with coordinates
To determine the orientation, a target with known
coordinates can also be used.
1. As orientation with coordinates.
2. Input of the orientation point number and to
determine the point found.
3. To input and confirm the reflector height.
For determining the orientation a maximum of 5
target points with known coordinates can be used.
1) 1. Target point
2) 2. Target point
3) 3. Target point