User manual
29
Measuring Preparation /
Setting up
TPS400-5.0.1en
External power supply for total
station
To meet the conditions stipulated for electromag-
netic acceptability when powering the TPS400 from
an external source, the supply cable used must be
equipped with a ferrite core.
)
The Lemo plug with the ferrite core always
has to be attached at the instrument side.
The cables supplied along with your instrument
include a ferrite core as standard.
If you are using older cables without ferrite core, it's
necessary to attach ferrite cores to the cable.
If you need additional ferrite cores, please contact
your local Leica Geosystems agency. The spare-
part number of the ferrite core is 703 707.
For assembling open up one ferrite core and clip it
around the supply cable, about 2cm away from the
Lemo plug, before using the supply cable for the first
time together with a TPS400 instrument.