Technical information

0-81 Working Days
Array with 7 elements [0] - [6] displayed below parameter
number in display. Press OK and step between elements by
means of
▲
and
▼
buttons on the LCP.
Option: Function:
Set for each weekday if it is a working day or a non-
working day. First element of the array is Monday. The
working days are used for Timed Actions.
[0] * No
[1] Yes
0-82 Additional Working Days
Array with 5 elements [0] - [4] displayed below parameter
number in display. Press OK and step between elements by
means of
▲
and
▼
buttons on the LCP.
Range: Function:
Size related* [ 0 - 0 ] Defines dates for additional
working days that normally
would be non-working days
according to 0-81 Working
Days.
0-83 Additional Non-Working Days
Array with 15 elements [0] - [14] displayed below parameter
number in display. Press OK and step between elements by
means of
▲
and
▼
buttons on the LCP.
Range: Function:
Size related* [ 0 - 0 ] Defines dates for additional
working days that normally
would be non-working days
according to 0-81 Working
Days.
0-89 Date and Time Readout
Range: Function:
0 * [0 - 0 ] Displays the current date and time. The date and
time is updated continuously.
The clock will not begin counting until a setting
different from default has been made in 0-70 Date
and Time.
Parameter Description
VLT
®
HVAC Drive Programming Guide
34 MG11CD02 - VLT
®
is a registered Danfoss trademark
3
3