Technical information

ManualsBrandsDSP ManualsComputer equipmentTP400 PC

0-20 Display Line 1.1 Small

Option: Function:

[1666] Digital Output

[bin]

Binary value of all digital outputs.

[1667] Pulse Input #29

[Hz]

Actual value of the frequency

applied at terminal 29 as a pulse

input.

[1668] Pulse Input #33

[Hz]

Actual value of the frequency

applied at terminal 33 as a pulse

input.

[1669] Pulse Output #27

[Hz]

Actual value of pulses applied to

terminal 27 in digital output mode.

[1670] Pulse Output #29

[Hz]

Actual value of pulses applied to

terminal 29 in digital output mode.

[1671] Relay Output [bin] View the setting of all relays.

[1672] Counter A View the present value of Counter

[1673] Counter B View the present value of Counter

[1675] Analog In X30/11 Actual value of the signal on input

X30/11 (General Purpose I/O Card.

Option)

[1676] Analog In X30/12 Actual value of the signal on input

X30/12 (General Purpose I/O Card.

Optional)

[1677] Analog Out X30/8

[mA]

Actual value at output X30/8

(General Purpose I/O Card. Optional)

Use 6-60 Terminal X30/8 Output to

select the variable to be shown.

[1680] Fieldbus CTW 1 Control word (CTW) received from

the Bus Master.

[1682] Fieldbus REF 1 Main reference value sent with

control word via the serial

communications network e.g. from

the BMS, PLC or other master

controller.

[1684] Comm. Option

STW

Extended fieldbus communication

option status word.

[1685] FC Port CTW 1 Control word (CTW) received from

the Bus Master.

[1686] FC Port REF 1 Status word (STW) sent to the Bus

Master.

[1690] Alarm Word One or more alarms in a Hex code

(used for serial communications)

[1691] Alarm Word 2 One or more alarms in a Hex code

(used for serial communications)

[1692] Warning Word One or more warnings in a Hex

code (used for serial communi-

cations)

0-20 Display Line 1.1 Small

Option: Function:

[1693] Warning Word 2 One or more warnings in a Hex

code (used for serial communi-

cations)

[1694] Ext. Status Word One or more status conditions in a

Hex code (used for serial communi-

cations)

[1695] Ext. Status Word 2 One or more status conditions in a

Hex code (used for serial communi-

cations)

[1696] Maintenance

Word

The bits reflect the status for the

programmed Preventive

Maintenance Events in parameter

group 23-1*

[1830] Analog Input

X42/1

Shows the value of the signal

applied to terminal X42/1 on the

Analog I/O card.

[1831] Analog Input

X42/3

Shows the value of the signal

applied to terminal X42/3 on the

Analog I/O card.

[1832] Analog Input

X42/5

Shows the value of the signal

applied to terminal X42/5 on the

Analog I/O card.

[1833] Analog Out X42/7

[V]

Shows the value of the signal

applied to terminal X42/7 on the

Analog I/O card.

[1834] Analog Out X42/9

[V]

Shows the value of the signal

applied to terminal X42/9 on the

Analog I/O card.

[1835] Analog Out

X42/11 [V]

Shows the value of the signal

applied to terminal X42/11 on the

Analog I/O card.

[1836] Analog Input

X48/2 [mA]

[1837] Temp. Input

X48/4

[1838] Temp. Input

X48/7

[1839] Temp. Input

X48/10

[1850] Sensorless

Readout [unit]

[2117] Ext. 1 Reference

[Unit]

The value of the reference for

extended Closed Loop Controller 1

[2118] Ext. 1 Feedback

[Unit]

The value of the feedback signal for

extended Closed Loop Controller 1

[2119] Ext. 1 Output [%] The value of the output from

extended Closed Loop Controller 1

[2137] Ext. 2 Reference

[Unit]

The value of the reference for

extended Closed Loop Controller 2

Parameter Description

VLT

HVAC Drive Programming Guide

28 MG11CD02 - VLT

is a registered Danfoss trademark