Technical information

Contents
1 Introduction
3
1.1.1 Copyright, Limitation of Liability and Revision Rights 3
1.1.2 Approvals 3
1.1.3 Symbols 3
1.1.4 Abbreviations 4
1.1.6 Definitions 4
2 How to Programme
9
2.1 Local Control Panel
9
2.1.1 How to Operate Graphical LCP (GLCP) 9
2.1.2 How to Operate Numeric LCP (NLCP) 12
2.1.5 Quick Menu Mode 14
2.1.6 Function Set-ups 16
2.1.7 Main Menu Mode 19
3 Parameter Description
22
3.1 Parameter Selection
22
3.1.1 Main Menu Structure 22
3.2 Main Menu - Operation and Display - Group 0
23
3.3 Main Menu - Load and Motor - Group 1
35
3.4 Main Menu - Brakes - Group 2
49
3.5 Main Menu - Reference/Ramps - Group 3
52
3.6 Main Menu - Limits/Warnings - Group 4
58
3.7 Main Menu - Digital In/Out - Group 5
62
3.7.4 5-13 Terminal 29 Digital Input 65
3.8 Main Menu - Analog In/Out - Group 6
75
3.9 Main Menu - Communications and Options - Group 8
82
3.10 Main Menu - Profibus - Group 9
89
3.11 Main Menu - CAN Fieldbus - Group 10
94
3.12 Main Menu - LonWorks - Group 11
97
3.13 Main Menu - Smart Logic - Group 13
98
3.14 Main Menu - Special Functions -Group 14
109
3.14.6 14-50 RFI Filter 113
3.15 Main Menu - Drive Information - Group 15
115
3.16 Main Menu - Data Readouts - Group 16
120
3.17 Main Menu - Data Readouts 2 - Group 18
127
3.18 Main Menu - FC Closed Loop - Group 20
129
3.19 Main Menu - Extended Closed Loop - Group 21
140
3.20 Main Menu - Application Functions - Group 22
147
3.21 Main Menu - Time-based Functions - Group 23
159
Contents
VLT
®
HVAC Drive Programming Guide
MG11CD02 - VLT
®
is a registered Danfoss trademark 1