Specifications

D4 158004.B00
D.5 ACCESSORIES
Table D5 lists some or all of the following items may be of use during your
development process. Some of the items are included in the TP400PAK product.
ITEM DESCRIPTION
TP400PAK Starter pack for TP400. See section D.3 for full details. The individual items in
Table D3 can also be ordered separately.
TP400-UTILS Set of floppy disks containing BIOSes and support software.
TRM-TP400 Technical Reference Manual for TP400.
TP400ET Ethernet adapter board for TP400
TP300USB USB adapter board for TP400
TB486ET-CAB Cable assembly to connect TP400 Ethernet and USB connectors to the TP400ET
or TP300USB.
TP300-CRTCAB Cable assembly - connects TP400 J6 to a 15-way VGA CRT connector. Includes
3.5mm sockets for audio.
TP300-COM3CA Cable assembly - connects TP400 J5 to a 9-way D-type connector.
TC586HS Heatsink and thermally conductive doubled-sided adhesive tape, to attach to the
processor.
TCONN Connector Breakout PCB for TP400. Standard PC connectors for keyboard,
mouse, 3 x serial, printer, VGA, power inlet. With EMC filtering.
TCONN-PSU Mains power supply for TCONN. 5V, 2.5A output.
TPPCI Adapter to allow standard PCI bus peripherals to connect to the PCI connector on
the TP400.
TFTIF31 Display adapter board - plugs into Sharp 640 x 480 TFT displays (and others with
compatible pin assignments) and accepts input from TP400.
TFTIF41 Display adapter board - plugs into Sharp 800 x 600 TFT displays and some 1024 x
768 displays (and others with compatible pin assignments) and accepts input from
TP400.
TFTIFS15 Display adapter board - plugs into Hosiden 1024 x 768 TFT displays and accepts
input from TP400.
TFTIF-CAB11 40-way cable assembly for TFTIFxx boards, connector at both ends, length 11
inches.
EC586-LCA 40-way cable assembly for flat panel displays, connector at one end, length 10
inches.
TFT6KIT 6.4" TFT LCD kit, including 6.4" high-brightness 640 x 480 LCD panel, backlight
inverter, TFTIF31 interface board, TFTIF-CAB11 40-way ribbon cable and cable for
backlight inverter.
TS6KIT Touchscreen controller kit for 8.4" TFT LCD.
TS8KIT Touchscreen controller kit for 6.4" TFT LCD. Used with TFT6KIT.
TFT10KIT 10.4" TFT LCD kit, including 10.4" high-brightness 640 x 480 LCD panel, backlight
inverter, TFTIF31 interface board, TFTIF-CAB11 40-way ribbon cable and cable for
backlight inverter.
TS10KIT Touchscreen controller kit for 10.4" TFT LCD. Used with TFT10KIT.
TFT12KIT 12" TFT LCD kit, including 12.1" high-brightness 800 x 600 LCD panel, backlight
inverter, TFTIF41 interface board, TFTIF-CAB11 40-way ribbon cable and cable for
backlight inverter.
TS12KIT Touchscreen controller kit for 12" TFT LCD. Used with TFT12KIT.
TS15KIT Touchscreen controller kit for 15" TFT LCD. Used with TFT15KIT.
TCDOS Microsoft MS-DOS Operating System.
WIN95FL Windows 95 operating system.
TCSPACER PC/104 spacer kit - four 0.6 inch spacers plus nuts and screws.
TCDISK-xxxx High capacity byte 2.5 inch IDE drive. Capacity may vary. Inquire before ordering.
EC586-IDECA Cable to connect the TP400 to 2.5 inch IDE drives
IDE-3020 Cable to convert 2.5inch IDE connector to 3.5 inch IDE connector and vice-versa.
DIS26 Slim-line 3.5 inch floppy disk drive with 26-way connector.
DIS26-CA 26-way flat flexible cable for DIS26 floppy disk drive.
DIS35-26 Adapter to allow connection of a 3.5" floppy disk drive to the TP400, via the DIS26-
CAB flat flexible cable.
KBDATPS2 Adapter to allow 5-pin mini-DIN keyboard to plug into the 6-pin mini-DIN keyboard
connector.
TABLE D5 - TP400 ACCESSORIES