Specifications

B6 158004.B00
LK104 - LK107 Vcore Voltage Selection.
These links are set to select the Vcore voltage for the Geode processor. The Vcore
voltage can be chosen to match the processor and the clock frequency.
PROCESSOR CLOCK VCORE LK104 LK105 LK106 LK107
GXm 266MHz 2.9V 2-3 Don’t
Care
Don’t
Care
Don’t
Care
Geode GXLV 200MHz 2.2V 1-2 OPEN OPEN OPEN
Geode GX1 300MHz 2.0V 1-2 LINK OPEN OPEN
Geode GX1 266MHz 1.8V 1-2 LINK LINK OPEN
Geode GX1 200MHz 1.6V 1-2 LINK LINK LINK
TABLE B3 - VCORE VOLTAGE SELECTION
LK108 Power Supply Clock
This link is factory fitted and must not be changed.
LK109 Ethernet Serial EEPROM
This link is factory fitted and must not be changed.
LK110 Ethernet TxD Circuit
This link is factory fitted and must not be changed.
LK111 Ethernet PCI Slot Selection
This link can be used to select the PCI slot occupied by the Ethernet chip.
Slot 4: Link 1 – 2 (Default)
Slot 5: Link 2 – 3
LK112 Ethernet PCI Interrupt Selection
This link can be used to select the PCI interrupt pin used by the Ethernet chip.
INTD#: Link 1 – 2 (Default)
INTA#: Link 2 – 3