Specifications

158004.B00 E1
APPENDIX E: CONNECTOR PIN ASSIGNMENTS
This Appendix describes the connectors used on the TP400.
E.1 SUMMARY OF CONNECTORS
Table E1 and E2 lists the connectors on the TP400 main board and daughter board
respectively. The tables describe the type of the connectors and their functions. Note
that the right angle pin headers (J4, J5 and J6) could be fitted with alternative
connectors in order to facilitate plugging the TP400 into a motherboard.
NAME FUNCTION NO. OF PINS CONNECTOR TYPE
J1 PC/104 Bus 64 (2 x 32) Pin header, 0.1"
J2 PC/104 Bus 40 (2 x 20) Pin header, 0.1"
J3 PC/104-Plus Bus 120 (4 x 30) Pin header, 2mm
J4 I/O 50 (2 x 25) Rt. Angle pin header, 0.1"
J5 COM3 and COM4 14 (2 x 7) Rt. Angle pin header, 0.1"
J6 CRT, Audio and
A/D
16 (2 x 8) Rt. Angle pin header, 0.1"
J7 PanelLink Rev A: 8 (1 x 8)
Rev B: 10 (1 x 10)
Hirose DF13 socket
J8 LCD Display 40 (2 x 20) Straight pin header, 0.05"
J9 USB 8 (1 x 8) Hirose DF13 socket
J10 Inter-Board 120 (2 x 60) Hirose FX8
J11 Inter-Board 80 (2 x 40) Hirose FX8
TABLE E1 - CONNECTORS USED ON TP400 MAIN BOARD
NAME FUNCTION NO. OF PINS CONNECTOR TYPE
J100 IDE 44 (2 x 22) Straight pin header, 2mm
J101 Power Inlet 4 (4 x 1) AMP HE14, 0.1"
J103 Floppy 26 Flat Flexible cable, 1mm
J104 Fan 3 (3 x 1) AMP HE14, 0.1"
J104 Inter-Board 120 (2 x 60) Hirose FX8
J105 Inter-Board 80 (2 x 40) Hirose FX8
J106 Ethernet 8 (1 x 8) Hirose DF13 socket
TABLE E2 - CONNECTORS USED ON TP400 DAUGHTER BOARD