Specifications
SR830 DSP Lock-In Amplifier
1-6
DISPLAYS
Channel 1 4 1/2 digit LED display with 40 segment LED bar graph.
X, R, X Noise, Aux Input 1 or 2. The display can also be any of these
quantities divided by Aux Input 1 or 2.
Channel 2 4 1/2 digit LED display with 40 segment LED bar graph.
Y, θ, Y Noise, Aux Input 3 or 4. The display can also be any of these
quantities divided by Aux Input 3 or 4.
Offset X, Y and R may be offset up to ±105% of full scale.
Expand X, Y and R may be expanded by 10 or 100.
Reference 4 1/2 digit LED display.
Display and modify reference frequency or phase, sine output amplitude,
harmonic detect, offset percentage (X, Y or R), or Aux Outputs 1-4.
Data Buffer 16k points from both Channel 1 and Channel 2 display may be stored
internally. The internal data sample rate ranges from 512 Hz down to 1
point every 16 seconds. Samples can also be externally triggered. The data
buffer is accessible only over the computer interface.
INPUTS AND OUTPUTS
Channel 1 Output Output proportional to Channel 1 display, or X.
Output Voltage: ±10 V full scale. 10 mA max output current.
Channel 2 Output Output proportional to Channel 2 display, or Y.
Output Voltage: ±10 V full scale. 10 mA max output current.
X and Y Outputs Rear panel outputs of cosine (X) and sine (Y) components.
Output Voltage: ±10 V full scale. 10 mA max output current.
Aux. Outputs 4 BNC Digital to Analog outputs.
±10.5 V full scale, 1 mV resolution. 10 mA max output current.
Aux. Inputs 4 BNC Analog to Digital inputs.
Differential inputs with1 MΩ input impedance on both shield and center
conductor. ±10.5 V full scale, 1 mV resolution.
Trigger Input TTL trigger input triggers stored data samples.
Monitor Output Analog output of signal amplifiers (before the demodulator).
GENERAL
Interfaces IEEE-488 and RS232 interfaces standard.
All instrument functions can be controlled through the IEEE-488 and RS232
interfaces.
Preamp Power Power connector for SR550 and SR552 preamplifiers.
Power 40 Watts, 100/120/220/240 VAC, 50/60 Hz.
Dimensions 17"W x 5.25"H x 19.5"D
Weight 30 lbs.
Warranty One year parts and labor on materials and workmanship.