Service manual

9
VSX-918V-K
5
6 7 8
5
6 7 8
A
B
C
D
E
F
Display
1 SIGNAL indicators
Lights to indicate the type of input signal:
AUTO
Lights when AUTO signal select is on.
DIGITAL
Lights when a digital audio signal is
detected.
∂ DIGITAL
Lights when a Dolby Digital encoded signal
is detected.
6
6
0
L
C
R
L s
R s
[]
[]
[]
[]
[]
40 125 250 4 K 13 K
SP A B
01987654321
13
1615 17 1814 19 20
E O N
R DS
11
12
ANALOG
Lights when an analog signal is detected.
DTS
Lights when a source with DTS encoded
audio signals is detected.
2
Lights to indicate decoding of a DTS multichannel
signal.
3
∂ DIGITAL
Lights to indicate decoding of a Dolby Digital
multichannel signal.
4 ∂ PRO LOGIC II
Lights to indicate Pro Logic II decoding.
5 VIR. SB
Lights during Virtual surround back processing.
6 DIRECT
Lights when source Stream Direct playback is in
use. Direct playback bypasses the tone controls
for the most accurate reproduction of a source.
7 AUTO SURR.
Lights when the Auto Surround feature is
switched on
.
8 ATT
Lights when ANALOG ATTis used to attenuate
(reduce) the level of the analog input signal.
9 SLEEP
Lights when the sleep mode is active.
10 Tuner indicators
/ MONO
Lights when the mono mode is set using
the MPX button.
/ STEREO
Lights when a stereo FM broadcast is being
received in auto stereo mode.
/ TUNED
Lights when a broadcast is being received.
11 EON/RDS indicators
EON
Lights when the EON mode is set, and
flashes during an EON broadcast. The
indicator lights when the current station
carries the EON service.
RDS
Lights when an RDS broadcast is received.
12 Speaker indicators
Lights to indicate the current speaker system,
A and/or B.
13Character display
14
ADV.SURR. (Advanced Surround)
Lights when one of the Advanced Surround
modes has been selected.
15 WMA9 Pro
Lights to indicate decoding of a WMA9 Pro
signal.
16 MIDNIGHT
Lights during Midnight listening.
17 D.E.
Lights when Dialog Enhancement is switched
on.
18 LOUDNESS
Lights during Loudness listening.
19Master volume level
Shows the overall volume level.
20 MCACC channel EQ / Sound Retriever /
HDMI indicators
These indicators show the EQ balance for each
channel in
Checking your Acoustic Calibration
EQ settings
. Also, L and R light
when the Sound Retriever is active.
In addition, the HDMI connection state is
displayed as shown below.
Blinks when connecting an HDMI-equipped
component: lights when the component is
connected.
6
6
0
L
C
R
L
s
R
s
[]
[]
[]
[]
[]
HDMI indicator