Service manual

11
VSX-918V-K
5
6 7 8
5
6 7 8
A
B
C
D
E
F
8 Number buttons and other component
controls
Use the number buttons to directly select a
radio frequency or the tracks on a
CD, DVD, etc. There are other buttons that can
be accessed after the RECEIVER button is
pressed. (For example MIDNIGHT, etc.)
TUNER DISP*
Switches between named station presets
and radio frequencies.
CLASS*
Switches between the three banks
(classes) of radio station presets.
MPX*
Switches between stereo and mono
reception of FM broadcasts. If the signal is
weak then switching to mono will improve
the sound quality.
D.ACCESS*
After pressing, you can access a radio
station directly using the number buttons.
MIDNIGHT
Switches to Midnight or Loudness
listening.
ANALOG ATT
Attenuates (lowers) the level of an analog
input signal to prevent distortion.
DIMMER
Dims or brightens the display.
SLEEP
Press to change the amount of time before
the receiver switches into standby (30 min
– 60 min – 90 min – Off). You can check
the remaining sleep time at any time by
pressingSLEEP once.
SIGNAL SEL
Use to select an input signal.
SR + (VSX-918V model only)
Switches the SR+ mode on/off.
EON*
Use to search for programs that are
broadcasting traffic or news information.
iPod CTRL
Switches between the iPod controls and
the receiver controls.
DISC (ENTER)
Use to enter commands for TV or DTV, and
also use to select a disc in a multi-CD
player.
9 INFO
Use to bring up information screens on a
digital TV.
10 SHIFT
Press to access the ‘boxed’ commands (above
the buttons) on the remote. These buttons are
marked with an asterisk (* ) in this section.
11 Remote control LED
Lights when a command is sent from the
remote control.
12
SOURCE
Press to turn on/off other components
connected to the receiver.
13 RECEIVER
Switches the remote to control the receiver
(used to select the green commands above the
number buttons (SETUP, etc)). Also use this
button to set up surround sound.
T.EDIT
Memorizes/names stations for recall.
MENU
Displays the disc menu of DVD-Video discs.
RETURN
Confirm and exit the current menu screen.
CH +/–*
Use to select channels for DVD/DVR units.
6 (TUNE , ST ), ENTER
Use the arrow buttons when setting up your
surround sound system. Also used
to control DVD menus/options.
Use the TUNE buttons can be used to
find radio frequencies and the ST
buttons can be used to select preset radio
stations.
7 Component control buttons
The main buttons ( , , etc.) are used to
control a component after you have selected it
using the MULTI CONTROL buttons.
The controls above these buttons can be
accessed after you have selected the
corresponding MULTI CONTROL button (for
example DVD,DVRorTV(when connected to
a DTV)).
SUBTITLE*
Displays/changes the subtitles included in
multilingual DVD-Video discs.
REC*
Start recording.
AUDIO*
Changes the audio language or channel
on DVD discs.
HDD*, DVD*
These buttons switch between the hard
disk and DVD controls for HDD/DVD
recorders.
REC STOP*
Stops recording.
JUKEBOX*
Switches to the Jukebox feature.
TV/DTV
Switches between the analog TV and DTV
input modes for Pioneer flat screen TVs.
14 TV CONTROL buttons
These buttons are dedicated to control the TV
assigned to the TV CTRL button. Thus if you
only have one TV to hook up to this system
assign it to the TV CTRL MULTI CONTROL
button. If you have two TVs, assign the main TV
to the TV CTRLbutton.
Use to turn on/off the power of the TV.
INPUT SELECT
Use to select the TV input signal.
TV CH +/–
Use to select channels.
TV VOL +/–
Use to adjust the volume on your TV.