Installation Guide

Care and Cleaning
Troubleshooting
□
□
Problem Possible Cause Solution
The lights will not turn on. The bulb is burned out. Replace the light bulb.
The power is off. Ensure the power supply is turned on.
There is a faulty switch. Test or replace the switch.
Check the wiring.
There is a faulty wire connection.
Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully.
To clean the xture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box, and use a dry or
slightly dampened, clean cloth to wipe the exterior surface of the xture.
The fuse blows, or the circuit breaker
trips, when the light is turned on.
There are crossed wires, or the power
wire is grounding out.
Service Parts
8
MODEL: DSHD19559P
Discontinue use of the lamp. Check the wire connections.
Contact a qualied electrician or call Customer Care
Service Team at 1-800-388-6141 ext 216. For customer
service support and the fastest response, please email us at
[e-mail].
AA
BB CC
EE FF
DD
B
A
A
B
Fixture body
Shade
AA
BB
CC
Outlet box screw
Lock screw
Wire connector
EE
FF
Mounting screw
Mounting ball
DD
(Pre-assembled to xture body)
Crossbar assembly
(Pre-assembled to xture body)
Part Description