Instructions / Assembly

Installation

AA BB

□ Fasten the support screws (long) (CC) into the mounting

bracket (AA), and secure it using the hex nuts (DD).

□ Fasten the mounting bracket (AA) onto the outlet box using

two outlet box screws (short) (BB).

Preparing the mounting bracket

NOTE: The support screws (long) (CC) should extend

long enough to protrude through the canopy on the

fixture body (A) when it is mounted. (Adjust as needed.)

Installing the mounting bracket

□ Strip 3/4 in. of insulation from the wire ends.

□ Connect the black wire from the xture to the black wire from the outlet box, then connect the white wire from the xture to the

white wire from the outlet box.

□ The bare copper ground wire from the xture must loop one turn under the head of the green ground screw (EE) on the mounting

bracket (AA) before it is connected to the ground conductor of the supply circuit.

□ Cover the wires with wire connectors (FF). Tape the wire connectors (FF) and wires together, and carefully position all wires inside

the outlet box.

Making the electrical connections