Installation Guide

Care and Cleaning
□
□
Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully.
To clean the xture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box, and use a dry or
slightly dampened, clean cloth to wipe the exterior surface of the xture.
Service Parts
7
MODEL: DSHD19542F
A
Fixture body
AA
BB
CC
Outlet box screw
Mounting screw
Wire connector
DD
(Pre-assembled to xture body)
Crossbar Assembly
(Pre-assembled to xture body)
A
Part Description
AA
BB CC
DD
Troubleshooting
Problem Possible Cause Solution
The power is off. Ensure the power supply is turned on.
There is a faulty switch. Test or replace the switch.
Check the wiring.
There is a faulty wire connection.
The fuse blows, or the circuit breaker
trips, when the light is turned on.
There are crossed wires, or the power
wire is grounding out.
Discontinue use of the lamp. Check the wire connections.
Contact a qualied electrician or call Customer Care
Service Team at 1-800-388-6141 ext 216. For customer
service support and the fastest response, please email us
at [e-mail].
The LED will not light. The LED is burned out. Discontinue the use of the lamp.